L 157/24 Official journal of the European Communities 9.6.2006 ANNEX IV TYPES OF MACHINERY AND SAFETY COMPONENTS FOR WHICH THE PROCEDURE REFERRED TO IN ARTICLE 12(3) AND (4) MUST BE APPLIED A. Machinery 1. Circular saws (single or multi-blade) for working with wood and material with similar physical characteristics or for working with meat and material with similar physical characteristics, of the following types: 1. 1. Sawing machinery with fixed blade(s) during cutting, having a fixed bed or support with manual feed of the workpiece or with a demountable power feed. 1.2. Sawing machinery with fixed blade(s) during cutting, having a manually operated reciprocating saw-bench or carriage. 1.3. Sawing machinery with fixed blade(s) during cutting, having a built-in mechanical feed device for the work-pieces, with manual loading and/or unloading. 1.4. Sawing machinery with blade(s)during cutting, having mechanical movement of the blade,with manual loading and/or unloading. 2. Hand-fed surface planing machinery for wood working. 3. Thicknessers for one-side dressing having a built-in mechanical feed device, with manual loading and/or unloading for woodworking. 4. Band-saws with manual loading and/or unloading for working with wood and material with similar physical characteristics,or for working with meat and material with similar physical characteristics, of the following types: 4.1 Sawing machinery with fixed blade(s) during cutting, having a fixed or reciprocating-movement bed or support for the workpiece; 4.2 Sawing machinery with blade(s) assembled on a carriage with reciprocating motion. 5. Combined machinery of the types referred to in 1 to 4 and in point 7 for working with wood and material with similar physical characteristics. 6. Hand-fed tenoning machinery with several tool holders for woodworking. 7. Hand-fed vertical spindle moulding machinery for working with wood and material with similar physical characteristics. 8. Portable chainsaws for woodworking. 9. Presses, including press-brakes, for the cold working of metals, with manual loading and/or unloading, whose movable working parts may have a travel exceeding 6 mm and a speed exceeding 30 mm/s. 10. Injection or compression plastics-moulding machinery with manual loading or unloading. 11. Injection or compression rubber-moulding machinery with manual loading or unloading. 12. Machinery for underground working of the following types: 12.1 locomotivies and brake-vans, 12.2 hydraulic-powered roof supports, 13. Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism, 14. Removeable mechanical transmission devices including their guards. 15. Guards for removable mechanical transmission devices. 16. Vehicle servicing lifts. 17. Devices for the lifting of persons or of persons and goods involving a risk of falling from a vertical height of more than three metres. 18.Portable cartridge-operated fixing and other impact machinery. 19. Protective devices designed to detect the presence of persons. 20. Power-operated interlocking movable guards designed to be used as safeguards in machinery referred to in points 9,10 and 11. 21. Logic units to ensure safety functions. 22. Roll-over protection structures (ROPS). 23. Falling-object protective structures (FOPS). BACK